EXPANSIONSERT

Expansionsert 1

The EXPANSIONSERT1 thread insert consists of a cross-slotted basic body with internal thread, which has an external diamond knurl, and an spreader plate. When the thread insert is installed in the mounting hole, the diamond knurl part is expanded by the spreader plate which is pressed down. As a result, it is anchored in the wall of the hole.

The advantages

* Universal thread insert for thermoset and thermoplastic components

* High-strength threads by expansion anchoring

* Quick, cost-effective installation

Material: Cu Zn 38 Pb 2 (EU 2000/53 compliant)

Expansionsert 2

The EXPANSIONSERT 2 thread insert consists of a body with internal thread, which has knurls and undercuts on the circumferential surface. Inside the body, there is an spreader plate that is pressed downwards when the thread insert is installed in the mounting hole. Upon installation, the slotted bottom part of the EXPANSIONSERT 2 is expanded and its cutting rings are anchored in the wall of the mounting hole. The thread insert is thus reliably secured against pull-out and twisting.

The advantages

* For reactive resins, PUR, elastomers, integral hard foams as well as for wood composite materials

* Wear-resistant threads

* Quick, cost-effective installation

Material: Cu Zn 38 Pb 2 (EU 2000/53 compliant)